The Latest From HMM
OEKO-TEX
Ben Uyeda shares why he likes sustainable towel brand OEKO-TEX.
EP151 DIY Joint Roller
Ben makes a DIY joint roller.
EP150 DIY Sofa Bed
Ben design and builds a DIY Convertible Sofa Bed with three basic power tools.
EP149 DIY Easy-To-Build Plywood Desk
Ben Uyeda builds an easy plywood desk.
EP148 DIY Easy-Build Desks
Ben Uyeda builds 3 different desks that each take under 2 hours.
Join RYOBI Nation
Tools + Materials
Learn about the tools and materials we like working with at HomeMade Modern.
See Tools + Materials
Search Results for "cheap"
Nov
6
INSTRUCTIONS: This video is sponsored by Rust-Oleum. I got some misprinted carbon fiber golf club shafts and used them with Quikrete countertop mix to make a concrete and carbon fiber outdoor chair that I painted with an ombre finish using Rustoleom 2x spray paint. This was a really easy DIY concrete project and it’s not […]
Read The Rest →
Jul
28
I wanted a workbench that I can use both metal and wood projects so I designed this split top workbench with a removable steel top. The steel top for the workbench is made from a steel C-channel. It is a section of steel labeled C12x20.7 but I only picked it because I found a cheap […]
Read The Rest →
May
3
This DIY Outdoor Sofa was made out of Cumaru deck boards and uses pre-made cushions from Target. If you want to make less expensive version you could alter the design for 2x6s instead of using a tropical hardwood. We used 1” thick tropical hardwood deck boards from Advantage Lumber. The boards are about 5.5” wide […]
Read The Rest →
Feb
1
I started making these DIY concrete dragon scale pavers back in 2014. I 3D printed the pavers and then made a silicone mold. The mold is reusable and easy to clean. We made about 1-2 batches a pavers a week over the last few years. It only takes about 15 minutes to make a batch. […]
Read The Rest →
Apr
15
I designed this DIY plywood table so that it could be made out of a single sheet of ¾” plywood. The only power tools that I used were a circular saw and a drill/driver. This table does NOT require a CNC machine to make. SUPPLIES: ¾” Plywood Available at Home Depot I made two of […]
Read The Rest →
Mar
10
I designed this sofa so that it has a built-in counter along the back. The counter gives it additional functionality that makes it great for having a get-together for watching a movie or sporting event, even in a small space. The frame for this DIY sofa is made out of ¾” thick plywood, a 2×10, […]
Read The Rest →
Apr
23
Here are my 10 favorite DIY projects from Ryobi Nation! I have been posting DIY projects on Ryobi Nation for a couple years now but today I thought it would be fun to share some of the projects on the site that other people designed. Even though I am known for my simple modern designs […]
Read The Rest →
Jan
8
Keep your space warm with a rolling concrete fire table that also doubles as a coffee table.
Read The Rest →
Nov
1
Jul
5
